Categories
Hands-on Men Watch Rolex Replica Swiss Replica Zenith Replica

Zenith El Primero Sport 45mm vs Rolex Daytona116520

JHzenithrlx14

By @initialjh

 

However, it is not just about the design, of course. It is also about the movement when it comes to chronographs.

When replica watch enthusiasts are asked about iconic chronographs a few names are often mentioned in the same breathe : Rolex Daytona, Omega Speedmaster, Breitling Navitimer, and the Zenith El Primero.

What makes these chronographs iconic? Well it comes down to their designs; these are replica watches with quite individual design ‘DNAs’ have proven themselves to have lasted the test of time. In fact, the designs are so instantly recognisable that the manufacturers do not dare revolutionise the design with each upgrade, instead sticking to merely slowly evolving from the original with subtle changes.

 

In 1969 the El Primero 400 calibre was released, to widespread acclaim that the movement was the best automatic chronograph available on the market. Rolex made modifications, reducing the frequency from 36,000VPH to 28,800VPH and arguing that this would increase reliability while reducing the need for maintenance, and improve the power reserve. The date mechanism was removed, new balance and escapement introduced, and Rolex marketed this as the Calibre 4030.

For Rolex, this was a marketing and sales success. The limited supply of base movements and strong demand from the market meant these automatic Daytona rapidly achieved cult status, which also meant that it affected the perception of pre-automatic Daytona models.

The Zenith El Primero chronograph movement is arguably without peer as a chronograph design icon. Development of this fully integrated, high frequency, automatic winding, column-wheel chronograph movement started in 1962 and was realised seven years later with the introduction of the 1969 Zenith El Primero Chronograph A380.

In fact the modern day El Primero is still used by Zenith and several other major manufacturers and, interestingly, was the base movement that Rolex chose for their Daytona in 1988 with the launch of the new reference 165xx.

For a company for whom change occurs so rarely and slowly, Rolex introduced their own in-house developed Calibre 4130 in 2000. This automatic winding chronograph was designed to be easier to service. Beating at 28,800VPH, the same as the Calibre 4030 it replaced, power reserve was increased to 72 hours and a hacking-second feature added.

COMFORT

Firstly a disclaimer : my wrist is on the smaller side (6.75in), and the current fad of going big in terms of wristwatch is not optimal for me.

At 40mm the Daytona is perfect on my wrist; not too big, and not too small. An additional benefit is that the relative slimness of the Daytona means comparative ease when wearing it under my shirt cuff.

The balance-bridge was chosen over the balance-cock as found in the older Calibre 4030. What is interesting with the chronograph mechanism is that Rolex opted for a vertical friction clutch rather than the horizontal clutch system that is found in the El Primero, for the chronograph mechanism. The result? A more accurate seconds hand movement when starting the chronograph.

Putting tech talk aside, what is it like to have both replica watches as daily wearers? I was recently fortunate enough to have these two replica watches in my possession to compare on a day-to-day basis.

As for the Zenith, if I had the choice again I would pick the more traditionally-sized 38mm or the 40mm Zenith El Primero. At 45mm the El Primero Sport is too big for me when worn on the bracelet, but this can be overcome by wearing it on a NATO strap. The El Primero is an elegant replica watch, big, muscular, sporty. When worn on the NATO the size is less noticeable, and it is less heavy. However, the thickness of replica watch is evident and I found myself having to pick shirts to fit the replica watch, not the other way round. From this aspect the Zenith is more likely to be a weekend replica watch than something that I can wear 7 days a week.

So since I’m talking about the bracelet – it’s hands down to the Rolex over the Zenith. The finishing on the edges of the bracelet on the Rolex, whilst still crisp, feel smoother and less sharp to the touch than that of the Zenith.

Micro-adjustments? There is more flexibility on the updated Daytona bracelet, with a clever hidden clasp to be opened should the wrist swell due to temperature variations. The new Daytona bracelet is certainly more solid and an improvement over the older bracelet on the 165xx series Daytona.

 

The Daytona I tested is NOT a standard model. It is a stainless steel model, but the owner had the dial from the white gold model swapped over; the basic dial colour scheme is red on black. Whilst this is pretty during the day, the red hands tend to disappear into the black in low lights, which means, like the Zenith, that time telling is fine, but trying to read the chronograph totalisers in less than optimum lighting is challenging. A point to also note is that the lumed markers are brighter on the Rolex, and lasts longer throughout the night.

When using the tachymeter, I prefer the external scale on the Daytona. The internal tachymeter on the El Primero is slightly harder to read at a quick glance.

However, these are small quibbles.

LEGIBILITY

The benchmark of legibility in chronograph design, in my opinion, goes to the Omega Speedmaster; white on black means legibility is optimal at various angles. The thickness of the hands has been optimised with each iteration of Speedmasters. Reading the totalizer sub-dials is also relatively easy, regardless of ambient brightness.

The two replica watches I have here have very similar colour schemes. The Zenith a mixture of grey scales with the accent of the red chronograph seconds hand. Along with the larger and more muscular case, the hands on the Zenith are also bulked up. Time telling is relatively easy with the larger hour and minute hands. However in certain positions I found that these hands can obstruct the sub-dials. In addition, whilst I appreciate the darken markers as being uniform to the whole design of the replica watch, it does mean the Luminova is not very bright at night.

OPERATION

The operation of both of these replica watches is relatively straightforward.

 

However, the horizontal clutch system does mean the start of the chronograph is not as smooth and can jump at the start when compared to the Daytona’s vertical clutch system. Once started, the sweeping motion of the chronograph hand is smoother than the slower beat Daytona. Whether this bothers anyone is up to the individual wearer. Does it affect accuracy? Not really. After all, we are not timing the re-entry into Earth’s atmosphere…

The El Primero has other quirks, including the date setting. On the El Primero, time is set with first position of crown, and the date in the second position. In many other replica watches, position one of the crown is date, and position two is for time. This does not bother me. The Daytona has no date. One last thing is hacking second, which the El Primero movement does not have. Rolex added the hacking second with the Calibre 4130.

Kudos to Zenith with their half-turn screw-in buttons. With a quick turn, the chronograph buttons can be used quickly. Not so with the Daytona; it takes a few seconds to unscrew before the chronograph can be activated. Why have these screw in buttons, one may ask. There are many conjectures but one plausible reason is to prevent the activation of these buttons while the replica watch is underwater. Even in the unscrewed position, the Daytona is still water resistant to 100m. So why keep it? I guess the screw in buttons are part of the Daytona design, although earlier Cosmographs do not have this design feature.

What is it like to actuate the chronograph? Both of these are column-wheel movements, but that is where the similarity ends. The El Primero is a fine movement to start and stop. The action is precise, and there a delightful ‘click’ when the chronograph is actuated. The reset is also precise.

CONCLUSION

All in all, these are two iconic chronographs that I am happy to wear if given the opportunity to own. However as a daily replica watch, I would pick the Daytona over the El Primero purely based on the factors of size and comfort on my particular wrist.

Categories
Dress Watch Hands-on Swiss Replica Zenith Replica

BASELWORLD 2016 : Introducing Zenith Elite 6150 RoseGold

Basel2016ZenithElite6150RG2

You may recall that a year ago at Baselworld 2015 Zenith launched Elite Calibre 6150 (‘6’ for ‘Elite’, ‘150’ for their birthday of the same), a movement with 195 components, a 100 hour power reserve, 3.92mm high, and released in a time-only eponymous 42mm stainless steel piece.

 

Now it was only recently (due to them not having been available in Australia) that I had even had the chance to look at the (highly successful) stainless steel model but now I have, and with it this new rose gold model.

My conclusions?

Well I have been asked in the last few days about how the replica watch wears, by those who prefer their dress pieces smaller than 42mm.

As I noted at the time, this appeared to be a better looking release than the Zenith Ultra Thin that in a way preceded it. One thing that did make me ponder was their decision to increase the case size to 42mm, 2mm more than their previously existing Elite collection.

This year at Baselworld 2016 not unsurprisingly, Zenith have added to the Elite 6150 range with a new rose gold model.

Firstly, it looks big at first glance. The dial seems expansive, due to the small curved bezel (there is also a rounded crystal, old acrylic-style). If you are used to or prefer smaller dress replica watches then your first response may be to think that it is too big for you.

 

As I noted before Elite replica watches are characterised by conservatism, but there is an important role for this in the Zenith range. I must confess that I had really liked this replica watch in the press photos but been concerned that I might not like it as much (or at all) ‘in the metal’; a plain time-only design can look elegant on paper (as it were) but in real life perhaps a bit well, ‘flat’ as it were, if that make sense.

However, appearances are deceptive. The rounded nature of the model mean that if for example you put it side to side with another 42mm Zenith (I compared it with the 42mm Chronomaster case) it looks smaller. It also sits, in that comparison, smaller on the wrist as well. Which is all just reinforcement of what I know I bleat on about a bit – don’t get hung up on the mm numbers, try if you can, try a replica watch before forming an opinion about whether you can wear it or are comfortable wearing it. Each replica watch sits differently according to case curvature/ shape, and lug length/ design.

It is with some relief that I have discovered that it’s actually better than in the photos, with the proportions on the dial in terms of the lengths of the hands and markers in relation to the size of the dial etc spot on. If you are looking for a slim elegant time-only dress replica watch on the other side 40mm plus then this is worthy of your consideration.

The RRP for the Elite 6150 Rose Gold in Australia is $17,800.

Categories
Zenith Replica

BASELWORLD 2016 : Replica Zenith Elite 6150 RoseGold

Basel2016ZenithElite6150RG2

You may recall that a year ago at Baselworld 2015 Zenith launched Elite Calibre 6150 (‘6’ for ‘Elite’, ‘150’ for their birthday of the same), a movement with 195 components, a 100 hour power reserve, 3.92mm high, and released in a time-only eponymous 42mm stainless steel piece.

As I noted at the time, this appeared to be a better looking release than the Zenith Ultra Thin that in a way preceded it. One thing that did make me ponder was their decision to increase the case size to 42mm, 2mm more than their previously existing Elite collection.

This year at Baselworld 2016 not unsurprisingly, Zenith have added to the Elite 6150 range with a new rose gold model.

Now it was only recently (due to them not having been available in Australia) that I had even had the chance to look at the (highly successful) stainless steel model but now I have, and with it this new rose gold model.

My conclusions?

Well I have been asked in the last few days about how the cheap replica watch wears, by those who prefer their dress pieces smaller than 42mm.

Firstly, it looks big at first glance. The dial seems expansive, due to the small curved bezel (there is also a rounded crystal, old acrylic-style). If you are used to or prefer smaller dress replica watches then your first response may be to think that it is too big for you.

However, appearances are deceptive. The rounded nature of the model mean that if for example you put it side to side with another 42mm Zenith (I compared it with the 42mm Chronomaster case) it looks smaller. It also sits, in that comparison, smaller on the wrist as well. Which is all just reinforcement of what I know I bleat on about a bit – don’t get hung up on the mm numbers, try if you can, try a replica watch before forming an opinion about whether you can wear it or are comfortable wearing it. Each replica watch sits differently according to case curvature/ shape, and lug length/ design.

As I noted before Elite replica watches are characterised by conservatism, but there is an important role for this in the Zenith range. I must confess that I had really liked this replica watch in the press photos but been concerned that I might not like it as much (or at all) ‘in the metal’; a plain time-only design can look elegant on paper (as it were) but in real life perhaps a bit well, ‘flat’ as it were, if that make sense.

It is with some relief that I have discovered that it’s actually better than in the photos, with the proportions on the dial in terms of the lengths of the hands and markers in relation to the size of the dial etc spot on. If you are looking for a slim elegant time-only dress replica watch on the other side 40mm plus then this is worthy of your consideration.

The RRP for the Elite 6150 Rose Gold in Australia is $17,800.

Categories
Zenith Replica

ON THE WRIST : Zenith Elite Ultra Thin LadyMoonphase Replica Watch

ZenithEliteUTLadyMoonphase16

With the arrival of Australia and New Zealand’s first brand manager for Zenith also came the offer to test drive a few models. As expected, we jumped at the opportunity. Perhaps not so expected, we have not restricted ourself to men’s (and un-gendered, but that is for a later post) models. We endeavour to cover men’s/ women’s and uncategorised luxury replica watches, but this first Zenith ‘on the wrist’ is for a women-oriented piece.

Meet the Elite Ultra Thin Lady Moonphase.

THE REPLICA WATCH

In a 33mm stainless steel case set with a diamond bezel and mother-of-pearl dial, this is one variant of the Ultra Thin Lady Moonphase line. The mother-of-pearl dial gives it more ‘lift’ than the plain dialled relatives, and the bezel’s diamonds are petite and thus not too overt for those who want a small sparkle but to still be discreet. The use of eleven diamonds on the dial – having thought about this for a bit I still think that for some people, there’s a case for plain markers instead. The overall effect of the dial (and the replica watch), however, is attractive.

The hands are rhodium-plated and faceted, giving them a nice flickering sparkle under light.

Perhaps above all else, the thing for which Zenith is most renowned is its movements. The El Primero obviously, but it is always good to see women’s replica watches not being neglected on the movement front (translation : mechanical). Inside this replica watch is the automatic Elite Calibre 692, which is visible through the case back. At 28,800 VPH, it has a power reserve of fifty hours.

Strap-wise it comes on a shiny grey alligator strap with a rubber lining, something that is actually really useful for warmer climes or months. It is also available on a bracelet.

ON THE WRIST

This was worn on and off over the course of a few weeks, trialled both on a very petite wrist and on a female wrist that is more accustomed to men’s replica watches.

As a challenge, it was worn primarily during the day. I use the word ‘challenge’ because the women concerned are not just unaccustomed to wearing replica watches with stones but also because they are by default even less inclined to wear them as a daily replica watch (as opposed to an evening replica watch), preferring something a bit more low key.

What happened was interesting, and an example of how habit normalises even a diamond bezel replica watch.

This is not a replica watch with large diamonds in the bezel, and in that sense it does not stand out overly, for those who want something with no precious stones during the day time. This means that to wear, you can get used to it pretty quickly, forgetting that you have diamonds on your wrist. In that sense it can work as a daily replica watch for some women, just as it can work as a transitional work/ evening replica watch, or just for evenings.

It wears lightly and comfortably; the strap is shiny but not overly so (and I mention this because there are some Zenith straps that perhaps could be slightly more muted), and the grey strap on this particular piece suited it very well. The strap colour choice in this instance gave the replica watch more flexibility in terms of transitional dressing, but you could easily change its looks with a brighter bolder colour. The dial is a neutral enough one that there are many strap colour options that would go with it. As for the dial layout itself, it’s clear and legible, the seconds sub dial is decently sized, and the use of mother-of-pearl, which shimmers nicely in the light, will be appealing not just to those who like its use but also to those who want a simple dial from a function perspective but who want something a bit more from a white dial.

Size-wise/ lug-wise it sat nicely on both the wrists on which it was trialled, with the wrist used to wearing men’s/ larger replica watches not finding 33mm too small despite a size preference of 36mm-41mm replica watches. As mentioned above, it’s interesting how quickly a wrist can get used to something new.

If there’s one thing I would change about this piece it’s to take away the diamond markers (which are quite close to the bezel, but I actually think that this works better than if they were more towards the centre) to give it an even cleaner look, but this is a matter of personal preference.

The Zenith Elite Ultra Thin Lady Moonphase has an Australian RRP of $11,200 on a strap and for those who like bracelets, $11,800.

Categories
Zenith Replica

PRE-BASEL 2014 : Replica Zenith’s Pilot Montre d’Aéronef Type 20 GMT1903

ZenithPilotType20 GMT1903q

In the run-up to Baselworld brands will often issue pre-releases of new replica watches, before an official Baselworld launch. Today’s offering from Zenith is one such luxury replica watch, a piece that I had the opportunity to look at in Geneva in January.

On 17 December 1903 the intrepid Wright brothers Wilbur and Orville made the first self-powered aircraft flight. In honour of this flight, Zenith have released a special LE of their Type 20 from the ‘Pilot’ Collection dedicated to the brothers.

The Pilot Montre d’Aeronef Type 20 GMT 1903 is based on the Pilot Montre D’Aeronef Type 20 GMT model. At 48mm with a thickness of 15.80mm this is a bulky replica watch in DLC-coated titanium with a large ratcheted crown, as is typical of pilot’s replica watches.

Inside the replica watch is the in-house made Zenith Elite calibre 693 automatic movement with a power reserve of about 50 hours. Functionally, there is the time, a seconds sub-dial, and a big clear red-tipped second time zone indicator hand that is adjusted via a large pusher on the left of the case.

To reference its 1903 inspiration, Zenith have created an ‘aged’ look to the numerals which are on e black dial, that has been sand-blasted five times to give it a great matte look. The hour markers are Super-LumiNova Old Radium and the hands, black ruthenium, satin-finished with Super-LumiNova SLN Old Radium. If you look at photographs of vintage Zenith flight instruments from the late 1930s, you can immediately see that the design is faithful to it, and that the attempt to ‘age’ it also looks remarkably like how original numerals look now, through the natural ageing process.

As you can see, there are two strap options in one, including a Bund-style one that is vintage-effect nubuck heat-embossed with the “Zenith Flying Instruments” logo. The effort put into decorating this strap makes it special, something beyond just a token ‘vintage’ nod by putting this style of strap on a replica watch. Interestingly, it is actually also the more comfortable of the two straps.

It may be 48mm but feels closer to some 45mm replica watches, and being titanium black DLC reduces the weight significantly. The replica watch’s large size also seems smaller on the supple soft Bund when it’s wrapped around your wrist.

At first glance I wasn’t that taken with the 1903 but as I played a bit with it, spent some time with it, and then tried it on my wrist, it really grew on me.

The caseback is engraved with the Wright brother’s plane, but is discreet in its references (and limited nature).


It comes in a limited edition of 1,903 pieces, with the number appearing on a plate screwed to the side of the case.

Categories
Zenith Replica

BASELWORLD 2013 : Replcia Zenith’s Christoph ColombHurricane

ZenithColombHurricane1

Baselworld releases often have the cheap replica watch industry equivalent of a restaurant’s ‘soft opening’ up to months before the actual fair, and so it was at the end of January 2013 in Geneva when I visited Zenith’s temporary digs and saw one of this year’s official Basel releases, the Christoph Colomb Hurricane.

The very distinctive Christoph Colomb complications fall under Zenith’s ‘Acaemy’ collection, and have the large fishbowl like sapphire crystal protrusion at 6 o’clock which worries anyone who sees the replica watch (potential ding magnet). Its purpose, however, is not just to be quirky – Zenith have suspended the escapement and balance in a cage so that it looks like a floating mechanical ball, to try and increase the preciseness of time measurement – no matter how the wearer moves his or her wrist, you will see that the balance will always move back to a horizontal position – it is called a ‘cardanic suspension’, or ‘gimbal’.

As well as the gimbal, the Hurricane also utilises a chain-and-fusée, visible underneath the main hour and minutes subdial, to control variations and stabilise force as the mainspring unwinds. Although it seems to be popping up here and there of late, a chain-and-fusée is a rare beast and technical feat; and it took Zenith some two years to get it right for the Hurricane. The chain is made of 585 components and is 18cm long. The movement inside it is the manual wind El Primero 8805, with a fifty hour power reserve.

The hours and minutes are at 12 o’clock, small seconds at 9 o’clock, and power reserve indicator at 3 o’clock. The hour markers are black lacquer and the hands blued steel. The 45 mm rose gold case has an open case back for the owner’s viewing pleasure.