Last month at an event in London, Renault announced the R.S. 17, a beast of a Formula 1 machine set to make its debut at the 2017 Australian Grand Prix later this month. Bell & Ross shortly after announced the new Bell & Ross BR RS17 watches, incorporating several design and material elements found in the recently announced Renault Formula 1 racer. It would be easy for a lot of brands to try and take an aviation watch and totally screw everything up by deciding they want an F1 racing-inspired line (of an iconic design, nonetheless). However, Bell & Ross decided to basically go all out with the design and material choices, and the result actually works and won me over.
Bell & Ross introduced three new watches to the line: the Bell & Ross BR 03-94 RS17 is based on the BR-03 and the simplest of the watches; the Bell & Ross BR-X1 RS17 is based off the BR-X1 done in “Carbon Forgé”; and then, there’s the BR-X1 RS17 tourbillon. Let’s take a look at the first two, non-tourbillon watches today – and get ready for a strong hit of yellow, green, and red.
At 42mm wide, the Bell & Ross BR 03-94 RS17 is done in a ceramic case that appears stealthy and should prove to be quite wearable for most in comparison to some of the larger BR 01 models. Like the Renault R.S. 17 with its molded carbon fiber honeycomb composite chassis, it features a dial made entirely out of carbon fiber – a material choice Bell & Ross claims was also inspired by the racer’s steering wheel.
The chronograph layout is colorful but standard and highly legible with a small seconds sub-dial placed at 3 o’clock and a 30-minute counter 9 o’clock. Both sub-dials, along with the date window highlight subtle touches of color against the carbon fiber dial that also carry into the central chronograph seconds hand. The hour and minute hands are faceted and are filled with Super-LumiNova, as are the large Arabic numerals on the dial.
The movement in the Bell & Ross BR 03-94 RS17 is the calibre BR-CAL.301. It’s a reliable, ETA-based automatic chronograph movement that Bell & Ross has utilized in previous releases like the BR-03 Desert Type chronograph announced last year. Like the dial, the pushers for the chronograph operation and the crown have also been finished in a similar color scheme that references more of the visual elements you’d find on the F1 racer. There’s no exhibition caseback, but the ceramic gives it a sleek look. You’ll see a photo of the rubber strap above but this watch is also going to come with a black synthetic fabric strap.
This Bell & Ross BR 03-94 RS17 watch is pretty demure compared to the larger and even more colorful BR-X1. Bell & Ross decided to throw subtlety to the wind – because if you’re buying an F1-inspired 45mm Bell & Ross watch, then you’re probably not trying to have your wrist candy blend into the crowd…
The Bell & Ross BR-X1 RS17 is bigger, at 45mm wide, and is done in the Carbon Forgé case based off the BR-X1 that was introduced in 2015. One piece of carbon fiber, the irregular pattern on the case of forged carbon watches lends a rugged aesthetic to the dynamic and loud colors on the dials of these watches. Again, it’s a pretty… intense-looking watch in that the build and structure of the imposing BR-X1 combined with the vivid colors will make sure that the person wearing it gets a lot of attention.
The fundamental modern components that Bell Ross Watches Perth Replica has worked into the watch comprise the selection of rising minute increments for the Arabic hour mark, the pilot-watch-inspired hand setup now typical in the “Vintage” collection, along with the date window, which may have worked better positioned at 3 o’clock, or even left off the dial completely, instead of hidden involving other numerals. One of the most fascinating contemporary features is at the size of the crown– while many vintage watches did have smaller tiles compared to those seen on watches today, the ratio of the event to crown on the BR V1-92 Military actually seems smaller and subtler compared to these vintage pieces. This design choice could have been to accentuate further the watch’s historical inspirations, but it’s certainly unusual for a timepiece evoking older models to miniaturize, instead of enlarge, any elements.As previously mentioned, this watch isn’t based on any specific version, but instead puts its focus on bringing together many interesting historical details to generate a modern yet vintage-appearing piece. Whether or not this sort of re-interpretation is desired or not is a question of personal taste, but on aesthetic worth alone the BR V1-92 Military is, to me, an intriguing watch. The item also represents, together with a number of other bits in the third generation of the brand’s “Vintage” collection, a growing interest by mainstream watchmakers to appeal to the expanding marketplace of retro-hungry customers. It seems the trend is no longer limited to long-established players such as Omega and Longines, or start-up independents like Nezumi, but is expanding to all corners of the market seeking to ride this tide of horological nostalgia while it lasts.
The protruding corners of the Bell & Ross BR-X1 RS17 are done in ceramic and give the watch even more wrist presence as a result of the design architecture here. The skeletonized dial looks as cool as it did when the Bell & Ross BR-X1 was released but it’s really hard to actually focus your eyes on the background when you’ve got a ring of colors diverting your attention.
The Bell & Ross BR-X1 is done by installing a Dubois Depraz chronograph/date module onto an ETA base which is referred to here as the BR-CAL.313 movement. The module brings the X-shaped skeletonized bridges, gears, date disc, and screws which are all designed to be shown off through the skeletonized dial. Just as interesting here is the strap which is paired with carbon fiber to round out the cohesive aesthetics.
Even though car and racing-inspired watches have been done to death, these watches are loud, bold, and attention-grabbing while still looking as sleek, stealthy, and masculine as the iconic Bell & Ross BR watches – the kind of watch that just might pull me into the sport a little more. The Bell & Ross BR 03-94 RS17 will be limited to 500 pieces and is priced at $6,200 while the BR-X1 RS17 will be limited to 250 pieces and be priced at $24,200. bellross.com